Opal PU Iron-On Vinyl 12 x 24 Inches
Is $ 15.00
Colour:
Please select
Quantity
Opal PU Iron-On Vinyl 12 x 24 Inches
Rated 3 out of
5
by
Boggles from
Looks good, difficult to work with.
There are no instructions on how to use this with the Cricut machine.
The transfer tape (which is already applied to the paper) was too sticky making weeding difficult
It has three layers the Sticky layer that sticks when heated, the foil layer and then the transfer layer.
As the transfer layer was so sticky the foil peeled from the base layer. Meaning I had to cut the foil by hand in places.
The end result was amazing, but it took a lot of effort.
You only get one sheet.
Date published: 2024-04-30
Rated 3 out of
5
by
Casseja from
Not sure of it
It cut and weeded really well but found it a bit difficult to bond with the fabric. Not really confident it will survive a wash.
Date published: 2023-02-25
Rated 2 out of
5
by
arali from
Very dissapointed…
I don’t like to make negative reviews, but I feel I need to warn you before you decide on buying this. I had such high hopes for this and looked forward to making projects with it. First of all, you have to find a setting that works for you, which means having to spend even more time cycling through test cuts. Secondly, weeding this is near impossible. Once you’ve pulled up the initial white backing, you notice that the foil has also been left as well, which means having to go back and weed that. Essentially, you’re weeding twice. Thirdly, whilst it looks beautiful if you can actually get it onto your blank, I don’t know how it will last during washes etc. Overall, I don’t recommend this but hope Hobbycraft can do something similar in the future, addressing all of these issues as I really do love the colour of this
Date published: 2023-09-25
Rated 1 out of
5
by
Lizzard from
Terrible product
First time I have brought hobby craft Vinyl, and its so awful.. It doesn't cut on my Cricut joy easily. I eventually got a cut if i set it to glitter vinyl ( after I read the revues below), but it cut poor and would not weed. I see that others have complained of this before and yet Hobby craft still sell it. I only purchased it a few days ago. Why is this still being sold if its so poor?
Date published: 2024-04-08
Rated 1 out of
5
by
HelenED from
Will not cut on a vinyl setting - Difficult to use
Does not cut on a vinyl setting…. I have a Cricut Maker 3 and this vinyl was impregnable on any of the vinyl settings. I ended up having to cut on a hard poster board setting to get through it. Only managed one very small project out of the full roll as there were so many mis-try’s due to its thickness. Does look lovely when on the project but for me was an absolute waste of money.
Date published: 2023-09-13
Rated 4 out of
5
by
Anonymous from
Glad I read these reviews! Nice vinyl if cut prope
I’m glad I read reviews after only one test run. I had to cut this vinyl on the “Poster” setting on Cricut rather than vinyl. However this did then weed and transfer really well. I would recommend that Hobbycraft add this instruction to their packaging, to avoid wastage. Otherwise, lovely vinyl and looks great on the material.
Date published: 2024-09-12
Rated 1 out of
5
by
VictoriaC92 from
Spend more and buy the cricut brand vinyl
Weeding a design that should have taken 10 minutes maximum took 2 hours due to when trying to remove the excess, a layer of vinyl would be left behind, I spend house scraping off excess layers of holographic foil. Worse vinyl I've EVER used.
Date published: 2024-09-15
Rated 1 out of
5
by
Cricutcat from
Poor quality
Brought this recently and what an absolute waste , I have had to run it through twice , it’s not an easy weed and have wasted so much Time and money on this.
Date published: 2024-04-10