Skip to Content (Press Enter) Skip to Footer (Press Enter)

How to Make a Bean Bag Chair

Level
Beginner
Time
1/2 day
Budget
10 - 30

Make a giant bean bag chair for your home to enjoy a fun, cosy feature that everyone will love! Great for use in the garden or for a quiet corner inside, this bean bag project is easy to make and will be a wonderful challenge for beginner sewers.

The addition of a separate lining means you can change how it looks with new outers as often as you like! You may want to use more or less filling depending on how slouchy you'd like your chair.

Project and instructions by @thecraftylass

 

You will need

Is $ 5.49

Quantity: 1

Subtotal

Is $ 5.49

Out of stock

Is $ 4.49

Quantity: 1

Subtotal

Is $ 4.49

Is $ 29.00

Quantity: 8

Subtotal

Is $232.00

Is $ 6.49

Quantity: 1

Subtotal

Is $ 6.49

Out of stock

Is $ 7.49

Quantity: 1

Subtotal

Is $ 7.49

Is $ 15.00

Quantity: 1

Subtotal

Is $ 15.00

Is $ 129.00

Quantity: 1

Subtotal

Is $ 129.00

You’ve viewed 2 of 7 products

You’ve viewed 4 of 7 products

Total:

How to make

You will also need an Iron, lining fabric and your choice of Joules fabric available in store

Step 1

Select, measure and cut out your fabrics. You will need:

Two 140cm x 90cm pieces of lining fabric.

Two 145cm x 90cm pieces of outer fabric.

You can of course adapt these measurements to make a larger or smaller bag.

Press your lining fabrics and lay the two lining pieces down, right sides together.

how_to_make_a_bean_bag_chair_1.jpg?sw=680&q=85
Step 2

At one of the 'width' ends, measure 15cm out both ways from each corner. Cut in an 'arc' between each of the corners two points so that you have one end of your lining has two curved corners.

how_to_make_a_bean_bag_chair_2.jpg?sw=680&q=85
Step 3

Using a straight running stitch and a 1cm seam allowance, sew all the way down one length edge, around the curved corner, along the bottom, around the other curved corner and back up the other side. Leave the other width side open. Secure your threads.

how_to_make_a_bean_bag_chair_3.jpg?sw=680&q=85
Step 4

Open up the now part sewn beanbag inner. Bring together and line up your two side seams so you effectively 'twisting' the whole bag around. This is what will form the pointed top to your chair. With a 1cm seam allowance, sew along this remaining edge but leave a small gap to allow you to fill your lining with beans.

how_to_make_a_bean_bag_chair_4.jpg?sw=680&q=85
Step 5

Turn your lining out the right way and fill the bag with beans. You don't want to fill it entirely, just enough so there is some space at the top. This means you will have room to 'sink' into the chair once made. I would recommend then tying a ribbon underneath your 'gap' to enclose - just so you can then sew the gap closed without worry for the beans coming out!

how_to_make_a_bean_bag_chair_5.jpg?sw=680&q=85
Step 6

Sew the gap to ensure the beans won't come out. You could either do this with machine sewing or by hand. You have now completed the inner bean bag chair!

Step 7

Press your outer fabrics and lay the two pieces down, right sides together. The same as your lining, at one of the 'width' ends, measure 15cm out both ways from each corner. Cut in an 'arc' between each of the corners two points so that you have one end of your lining has two curved corners.

how_to_make_a_bean_bag_chair_7.jpg?sw=680&q=85
Step 8

Using a straight running stitch and a 1cm seam allowance, sew all the way down one length edge, around the curved corner, along the bottom, around the other curved corner and back up the other side. Leave the other width side open. Turn the final open edge over and using a 1cm seam allowance sew all the way around the edge. Secure your threads.

how_to_make_a_bean_bag_chair_8.jpg?sw=680&q=85
Step 9

Put your beanbag inner inside your outer matching up the curved corners together. Your outer bag back edge is slightly longer than your inner, so then fold over the edge to match around the shape of your inner. Cut 12 strips of ribbon, each one around 20cm long. Pin the strips of ribbons into position periodically down the back edge seam – lined up with the other on the beanbag - so that once sewn, you can then tie the back up using the ribbons.

Step 10

Carefully remove your inner and then machine sew your ribbons into position.

how_to_make_a_bean_bag_chair_10.jpg?sw=680&q=85
Step 11

Secure all your threads, press your fabrics if required and put the inner back inside the outer before tying up the ribbons into bows.

how_to_make_a_bean_bag_chair_11.jpg?sw=680&q=85
Step 12

Your bean bag is now ready to use

joules-bean-bag-final.jpg?sw=680&q=85
Rated 4 out of 5 by from Not quite right?? Came online today to look for my beginner machine. Went through some reviews looking for my first challenge. Came across this one which seemed easy enough. Reviewer says that 1 bag of filler wasn’t enough, but actually the amount was 8 bags of filler that was required. If reviewer had read item’s correctly , this idea would not have a bad review and they would have been able to complete their project. I have since brought my machine and tried this idea and it’s coming together nicely. Not yet finished but will post once done
Date published: 2024-01-06
Rated 2 out of 5 by from instructions and pictures let this project down the instructions on this project leave lots to be desired. it is not clear for a beginner what is the "width end" when the first step is to cut fabric 140x90cm. it doesnt say 140 length,90width or vice versa. coupled with the less than clear pictures it is actually quite a misleading project. also the quantity of beans is well off
Date published: 2024-10-05
Rated 1 out of 5 by from Items needed for project - Filler not sufficient Number of Ltrs of filling is inadequate for this project having ordered the items as per the list. I was extremely disappointed with the filling amount recommended. One 14 ltr bag of eco filler@ £19 per bean bag is no where near the required quantity. Delaying the commencement of the project!
Date published: 2023-11-05
  • y_2024, m_12, d_17, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_GB, sid_how-to-make-a-bean-bag-chair, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_hobbycraft
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 7ms
  • reviews, product

Related Products

Top